|
|
Saddle Fitting Guide
If you do not know the correct saddle fitting for your horse or pony this is not a problem. Please follow this step-by-step guide, then we can arrive at the correct fitting for your animal.
If at anytime you would like some advice on this or any other matter relating to saddle fitting then please don't hesitate to contact us by telephone, fax or e-mail. All are given at the bottom of every page and are there for your assistance. |
STEP ONE
You need to produce two templates, which represent your horses back. The first template is taken directly over the withers where the front of the saddle, the head, will sit. If you can locate the animal's shoulder blade the profile should be just to the rear of this.
To record the profile, take a flexi curve or a flexible coat hanger and bend them to the profile of a vertical line some 8 inches (100cm) long down each side of the horse. Draw around the profile on a piece of card to record the shape and compare the shape to the standard profiles shown below. Find the closest profile to the one you have produced and draw it onto our profile print out |
STEP TWO
To take the second back profile carry out the same exercise at the location where the back of the saddle will be located, this should be where you can feel the last rib of the animal. Transfer this profile to a piece of card and post or fax both profiles to us at our address shown at the bottom of every page. If you fax the information then measure and mark on both profiles the base and height dimensions so that we can correct any distortions.
If your horse has prominent features on their back, high withers or flat backed the note these on your profiles.
To obtain an A3 profile chart, click each of the profiles below, print them and mark on them your horse's profiles. |
| Saddle Size Guide |
|
|
This Saddle Size Guide is to assist purchasers in determining the size of saddle for their needs. The size of saddle is determined by many factors, if you are at all unsure complete the guide, e-mail or fax it to us and we will make a recommendation to you without any obligation. |
|
|
|
Pennwood Saddle Company Ltd ,
Leamore Lane, Bloxwich, WALSALL, West Midlands.WS2 7NT.
tel. +44 (0)1743 762212 , mobile +44 (0) 7790 657 614, e-mail steve@pennwood.co.uk
|